home · games · tech info · articles · about · contact us
 
Disclaimer: This information is provided as is. There may be errors in this information. You may use this information only if you agree that Minimalist / Coinop.org, its employees, and noted authors will never be held responsible for any damage, injury, death, mayhem, etc. caused by errors in the information. When working with high voltage, never work alone and always follow safety precautions.

Document Title: [SpyHunter.html (html file)]

Spy Hunter Dip Switch Settings 

From gkam@newbridge.com

DIP SW. 1 (@ B3 on Sound I/O board)
-----------------------------------

sw 1-9:  Not used
sw 10:   0 = Norm. operation
         1 = Freeze video

DIP SW. 3 (@ D14 on Sound I/O board)
------------------------------------

sw 1:   1 = sound i/o diagnostic mode
        0 = normal mode
sw 2:   1 = RAM/ROM test mode
        0 = normal mode
sw 3:   1 = oscillator test mode
        0 = normal mode
sw 4:   1 = filter test mode
        0 = normal mode

Note: - if sw 1 is 0, all other switches are ineffective.
      - during RAM/ROM test, "fast" yellow LED flash = bad ROM,
        "slow" = bad RAM
      - for other settings, see self-test mode.