Coinop.org /// kdl

Disclaimer: This information is provided as is. There may be errors in this information. You may use this information only if you agree that Minimalist / Coinop.org, its employees, and noted authors will never be held responsible for any damage, injury, death, mayhem, etc. caused by errors in the information. When working with high voltage, never work alone and always follow safety precautions.

Electrohome GO7 C511 47uf 160VDC Causes activation of X-ray protection which in turn causes shutdown of horizontal oscillator. Monitor appears dead. Power supply voltage rises to approx 160 VDC. May also cause weird black areas to appear on the right side or top of the screen. C905 10uf 250VDC May cause jittery picture. C107 10uf 250VDC (on neck board) Cannot darken screen completely with screen control. C504 1uf 50VDC Wiggly picture; especially toward the top of the screen. Looks as if you should be able to adjust it out with the horizontal frequency control but you can't. C517 100uf 16VDC Picture keystoned. Sides not straight. C518 220uf 16VDC Picture keystoned. Sides not straight. C411 100uf 160VDC Poor vertical deflection. Hantarex MTC900 C25 47uf 16vdc Jailbars C36 22uf 35VDC Jailbars C83 47uf 25VDC Jailbars Hantarex MTC9000 C34 22uf 160VDC May cause shutdown of monitor. May cause interference bands on screen. Common failure starting now! Wells-Gardner K4600 C614 33uf 25vdc Keystoned picture. Sides not straight. C311 1000uf 35VDC Poor vertical deflection (picture doesn't fill screen) Wells-Gardner K4900 C702 10uf 100VDC Picture bright on the right side and dark on the left side. C313 100uf 160VDC Poor vertical deflection (picture doesn't fill screen) C507 47uf 160VDC May cause interference bands on screen. Nintendo (Sanyo Model 20-EZV) C407 10uf 160VDC Causes vertical foldover. The top part of the screen is squished. C302 1uf 50VDC Jail bars C467 1uf 160VDC Jail bars C468 330uf 25VDC Jail bars C469 220uf 25VDC Jail bars C471 10uf 160VDC Jail bars C472 100uf 160VDC Jail bars C459 100uf 16VDC. Horizontal tearing. Looks as if you should be able to adjust it out with the horizontal hold control but you can't. May cause multiple images. C303 10uf 50VDC Brightness too low. Matsushita (Pole Position) C455 100uf 100VDC Poor vertical deflection.

List of Bad Monitor Capacitors and Symptoms