|
Released in 1982
Member Rating
Manufacturer:
Sega
Developer:
Sega
Distributor:
Sega
Mame ROM Info
zaxxon,
Zaxxon (set 1)
zaxxon2,
Zaxxon (set 2)
zaxxonb,
Jackson
|
Display
Raster |
Orientation
Vertical |
Resolution
224 x 256 |
Colors
256, Color |
|
Genre
Shooting
|
Attributes
3D
|
|
Controls
1 Joystick / Button(s)
|
|
Size/Weight of Upright
72.0000
" x 28.0000" x 32.0000"
, 330.00lb.
Size/Weight of Cocktail
25.0000
" x 28.0000" x 36.0000"
, 165.00lb.
|
| |
|
Game Summary
Space - Fly over and destroy floating cities
Hardware Info
Z80
cpu
@ 3.072 Mhz
* Samples
audio
* Information was extracted from Mame, so "Samples audio" may indicate the game
has analog sound hardware.
Hardware Platform: Zaxxon hardware
Game Details
Forced perspective blaster - looked better than it played - Destroying Robot with missile ended level.
Coinop.org Member Ratings / Comments
comment
on this game
|
|
"Maybe" Images
(fuzzy search, these MAY match the game, or they may not)
|
Knowledge Base
/kb_dl.aspx/KB/gametech/board pinouts/futurespy.txt
Future Spy Pinouts
Note: this is adapted from David Holcomb's very thorough Zaxxon pinouts
file. See game_archive/boardPinots/Zaxxon.pin on wiretap.spies.com
for more info.
Future Spy belongs to the small Zaxxon family of boards (Zaxxon, Super
Zaxxon, and Future Spy) that all run off of the same hardware. Although
Super Zaxxon requires a small extra soundboard, Future Spy _appears_ to
be nothing more than a straight ROM swap away from an original Zaxxon
board.
There are only 2 small differences between
File:
/kb_dl.aspx/KB/gametech/board pinouts/futurespy.txt
-
4
K - Updated
1996.04.19
/kb_dl.aspx/KB/gametech/board pinouts/zaxxon.txt
Zaxxon
Sega/Gremlin, 1982
Other boards with the same pinouts (with the exception of some control
inputs):
Congo Bongo
Future Spy
Super Zaxxon
The original posting of this pinout had the parts side and solder side
reversed. This version of the pinout fixes that error and discusses how
to change to composite sync from positive to negative JAMMA compatible.
Thanks to Rick Schieve for pointing this out. The schematic that shows
the settings for this switch (SW4) is in the Zaxxon manual, drawing
num
File:
/kb_dl.aspx/KB/gametech/board pinouts/zaxxon.txt
-
9
K - Updated
1994.12.14
/kb_dl.aspx/KB/pinouts/super_zaxxon.txt
Zaxxon / Super Zaxxon / Congo Bongo
SOLDER SIDE | PARTS SIDE
Gnd | A | 1 | Gnd
Gnd | B | 2 | Gnd
+5V | C | 3 | +5V
+5V | D | 4 | +5V
-5V | E | 5 | -5V
+12V | F | 6 | (+12V)
[from P4-4 & to Spkr?] Spkr - | H | 7 | Spkr + [from P4-3 & to Spkr?]
(Coin Meter A) | J | 8 | (Coin Meter B)
File:
/kb_dl.aspx/KB/pinouts/super_zaxxon.txt
-
1
K - Updated
2003.01.06
/kb_dl.aspx/KB/gametech/futurespy.txt
FUTURE SPY DIP SWITCH SETTINGS
------------------------------
Howdy
Here are the DIP switch settings for Future Spy (grandson of Zaxxon),
as typed in by me (jasonbar@engineering.ucsb.edu). Note that, I hereby
declare that I can not be held accountable for your machine exploding
(or doing anything less drastic but still bad) if you set your switches
as described here. BTW, I was surprised to notice that these are totally
different from the Zaxxon.sw file here on wiretap...Also, note that the
red switc
File:
/kb_dl.aspx/KB/gametech/futurespy.txt
-
3
K - Updated
1996.10.11
/kb_dl.aspx/KB/test_equipment/univid 1000/univid_harness.txt
From: jeff hendrix <jhendrix@quark.com>
To: "'vectorlist@mcfeeley.cc.utexas.edu'"
Subject: RE: Univid 1000
Date: Mon, 1 Mar 1999 11:44:51 -0700
Here is a list of the harnesses and what boards they go to, I also might
have a few harnesses for trade.
UNIVID 1000 harness numbers
Atari
101 Arabian
102 Centipede
103 Cloak & Dagger
104 Crystal Castle
105 Dig Dug
106 Food-Fight
107 I-Robot
108 Kangaroo
109 Liberator
110 Millipede
111 Pole Position
111 Pole Position II
112 Xevious
Ce
File:
/kb_dl.aspx/KB/test_equipment/univid 1000/univid_harness.txt
-
3
K - Updated
2005.09.18
/kb_dl.aspx/KB/pinouts/zaxxon.txt
Zaxxon Sega/Gremlin, 1982
-------------------------
44pin connector at location P5 on Assy IC Brd A, Sound II
SOLDER SIDE | PARTS SIDE
|
Gnd | A | 1 | Gnd
Gnd | B | 2 | Gnd
+5V | C | 3 | +5V
+5V | D | 4 | +5V
-5V | E | 5 | -5V
+12V | F | 6 | (+12V)
File:
/kb_dl.aspx/KB/pinouts/zaxxon.txt
-
6
K - Updated
2003.01.06
/kb_dl.aspx/KB/gametech/congobongo.txt
From: gbbs2df2@ibmmail.com
Newsgroups: rec.games.video.arcade.collecting
Subject: congobongo/tiptip.sw
Date: Thu, 06 Jul 1995 19:04:24 GMT
Based on Zaxxon pinouts by Tom Nezwek (IO91461@maine.maine.edu)
Adjusted for Congo Bongo by Lee Taylor (lee@defender.demon.co.uk)
Congo Bongo / Tip Top Dip Switch Settings
-----------------------------------------
Switch Bank #1
--------------
SW #1 SW #2 (Bonus Ship) SW #5 SW #6
----- --
File:
/kb_dl.aspx/KB/gametech/congobongo.txt
-
4
K - Updated
2007.04.13
Up 'N Down, Flicky, SWAT, Watermatch, Bullfight, and Mr. Viking Pinouts
Up 'N Down, Flicky, SWAT, Watermatch, Bullfight, and Mr. Viking Dip Switch Settings and Pinouts
File:
/kb_dl.aspx/KB/gametech/up 'n down tech.html
-
4
K - Updated
2002.05.17
/kb_dl.aspx/KB/gametech/zaxxon.txt
* From: IO91461@maine.maine.edu (Tom Nezwek)
Zaxxon Dip Switch Settings
--------------------------
Switch Bank #1 My Defaults: SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8
-------------- ON ON ??? ??? ON ON ON OFF
SW #1 SW #2 (Bonus Ship) SW #5 SW #6
----- ----- ----- -----
ON ON AT 10,000 * ON ON 3 Ships *
ON OFF AT 20,000 ON OFF
File:
/kb_dl.aspx/KB/gametech/zaxxon.txt
-
3
K - Updated
1993.12.14
/kb_dl.aspx/KB/pinouts/flicky.txt
Flicky, Midway Sega, 1984
-------------------------
Game Logic Board, part. no. A084-91718-CA64
I cannot guarantee that the solder side is "A..Z" and the parts side is
"1..22". But whichever side is which, each letter and number should be
labeled with the correct pinout. This information was extracted from the
Up 'N Down manual.
Note: All these other games should also match this pinout: Up'n'DOWN, SWAT,
Watermatch, Bullfight, and Mr. Viking. The controls for all these games
should be exa
File:
/kb_dl.aspx/KB/pinouts/flicky.txt
-
2
K - Updated
2003.01.06
/kb_dl.aspx/KB/pinouts/mr_viking.txt
Mr. Viking Pinouts
Midway<Sega, 1984
Game Logic Board, part. no. A084-91718-CA64
I cannot guarantee that the solder side is "A..Z" and the parts side is
"1..22". But whichever side is which, each letter and number should be
labeled with the correct pinout. This information was extracted from the
Up 'N Down manual.
Note: All these other games should also match this pinout: Flicky, SWAT,
Watermatch, Up'n'Down, and Bullfight. The controls for all these games
should be exactly the same - on
File:
/kb_dl.aspx/KB/pinouts/mr_viking.txt
-
2
K - Updated
2003.01.07
/kb_dl.aspx/KB/pinouts/swat.txt
Swat Pinouts
Midway<Sega, 1984
Game Logic Board, part. no. A084-91718-CA64
I cannot guarantee that the solder side is "A..Z" and the parts side is
"1..22". But whichever side is which, each letter and number should be
labeled with the correct pinout. This information was extracted from the
Up 'N Down manual.
Note: All these other games should also match this pinout: Flicky, Up'n'Down
Watermatch, Bullfight, and Mr. Viking. The controls for all these games
should be exactly the same
File:
/kb_dl.aspx/KB/pinouts/swat.txt
-
2
K - Updated
2003.01.07
/kb_dl.aspx/KB/pinouts/up_n_down.txt
Up 'N Down Pinouts
Midway<Sega, 1984
Game Logic Board, part. no. A084-91718-CA64
I cannot guarantee that the solder side is "A..Z" and the parts side is
"1..22". But whichever side is which, each letter and number should be
labeled with the correct pinout. This information was extracted from the
Up 'N Down manual.
Note: All these other games should also match this pinout: Flicky, SWAT,
Watermatch, Bullfight, and Mr. Viking. The controls for all these games
should be exactly the same - on
File:
/kb_dl.aspx/KB/pinouts/up_n_down.txt
-
4
K - Updated
2003.01.06
/kb_dl.aspx/KB/pinouts/watermatch.txt
Watermatch Pinouts
Midway<Sega, 1984
Game Logic Board, part. no. A084-91718-CA64
I cannot guarantee that the solder side is "A..Z" and the parts side is
"1..22". But whichever side is which, each letter and number should be
labeled with the correct pinout. This information was extracted from the
Up 'N Down manual.
Note: All these other games should also match this pinout: Flicky, SWAT,
Up'n'Down, Bullfight, and Mr. Viking. The controls for all these games
should be exactly the same - one
File:
/kb_dl.aspx/KB/pinouts/watermatch.txt
-
2
K - Updated
2003.01.07
/kb_dl.aspx/KB/gametech/board pinouts/congobongo.txt
From: gbbs2df2@ibmmail.com
Newsgroups: rec.games.video.arcade.collecting
Subject: congobong/TipTop.pin
Date: Thu, 06 Jul 1995 19:03:24 GMT
Congo Bongo based on Zaxxon pinouts by Dave Holcomb (holcomb@halcyon.com)
Updated for Congo Bongo by Lee Taylor (lee@defender.demon.co.uk)
Congo Bongo / Tip Top (same game alternative name)
Sega, 1983
According to the service manual there apears to be two different board
sets.
One is constructed of 3 pcbs, the other 2.
3 Board set.
------------
Complete set part nu
File:
/kb_dl.aspx/KB/gametech/board pinouts/congobongo.txt
-
4
K - Updated
1995.12.31
/kb_dl.aspx/KB/gametech/board pinouts/flicky.txt
Flicky Pinouts
Midway<Sega, 1984
Game Logic Board, part. no. A084-91718-CA64
I cannot guarantee that the solder side is "A..Z" and the parts side is
"1..22". But whichever side is which, each letter and number should be
labeled with the correct pinout. This information was extracted from the
Up 'N Down manual.
Note: All these other games should also match this pinout: Up'n'DOWN, SWAT,
Watermatch, Bullfight, and Mr. Viking. The controls for all these games
should be exactly the same - one 8-way j
File:
/kb_dl.aspx/KB/gametech/board pinouts/flicky.txt
-
2
K - Updated
1997.12.03
LIST: SEGA Video Games in Japan
http://jedi.seg.kobe-u.ac.jp/~miyamo/game/ Year Title Title (Kanji) ------------------------------------------------------------------------ 1973 Pong Tron ポントロン Pong Tron II ポントロン２ Hockey TV ホッケーＴＶ 1974 Mini Hockey ミニホッケー Table Hockey テーブルホッケー Goal Kick ゴールキック 1975 Balloon Gun バルーンガン Erase イレース
File:
/kb_dl.aspx/KB/faqs/list-sega.html
-
16
K - Updated
1999.07.27
Yet Another List
O-Taito is the Old Taito pinout on wiretap. N-Taito is the New-Taito pinout (Like Elevator Action). Quote by R. Schieve: "Taito.pin will match most for power, ground, monitor, and speaker connections but inputs are usually quite different." DECO/Data East is the Data East pinout. See Ring King.pin or KarateChamp.pin.I AtariV is Black Widow and Gravitar and Space Duel Konami if the Konami pinout. See Konami\Rush'n'Attack.pin. BZone is Battle Zone and Red Baron Tehkan games seem to follow th
File:
/kb_dl.aspx/KB/faqs/list-yetanothergameslist.html
-
49
K - Updated
2002.06.10
The Sega/Gremlin X-Y FAQ
======================== The Sega/Gremlin X-Y FAQ version 1.6 written by: Mark Jenison ======================== 1. Introduction 2. The X-Y Convert-a-Game system a. The System 1. CPU boards 2. X-Y timing and control boards 3. Sound boards 4. EPROM boards b. Monitor: Electrohome G08 X-Y c. Power supply 3. Games a. Space Fury b. Star Trek c. Eliminato
File:
/kb_dl.aspx/KB/faqs/faq-segaxy_v1.6.html
-
28
K - Updated
1999.07.27
Seaga/Gremlin X-Y FAQ
======================== The Sega/Gremlin X-Y FAQ version 1.6 written by: Mark Jenison ======================== 1. Introduction 2. The X-Y Convert-a-Game system a. The System 1. CPU boards 2. X-Y timing and control boards 3. Sound boards 4. EPROM boards b. Monitor: Electrohome G08 X-Y c. Power supply 3. Games a. Space Fury b. Star Trek c. Eliminato
File:
/kb_dl.aspx/KB/gametech/segaxyfaq16.html
-
28
K - Updated
2000.01.23
Addresses FAQ (North American) for rec.games.video.arcade.collecting
Created and maintained by Tony Jones (tony@rtd.com) $Revision: 1.3 $ $Date: 1997/12/24 18:35:05 $ Thanks to: Rick Schieve Greg Woodcock (obsolete component vendors) If you have additions, corrections and (especially) more precise information about the products each supplier offers, please send me e-mail -- thanks! Contents: 1a) Game Manufacturers 1b) Game Manufacturers no longer in business. 2) Informational sources 3) Auction houses 4a) Distributors (Coin-op/United S
File:
/kb_dl.aspx/KB/faqs/faq-addresses list.html
-
22
K - Updated
1999.07.27
Arcade PCB Pinouts
Arcade Pinouts
1,003 Entries
Last Updated: May30, 2003
File:
/kb_dl.aspx/KB/pinouts/pinout.html
-
119
K - Updated
2003.05.30
Search the following for Zaxxon
|